Products tagged with '9 Pin'

9-Pin J1939/J1708 Green Bluetooth LE Adapter for Apple, Android and Windows

The BlueFire Data Adapter is an electronic device that connects to a truck, yacht, motorhome, (and more) on-board computers (ECUs) and transmits information wirelessly via Bluetooth to BlueFire Apps, a mobile application that runs on Apple, Android, Amazon, and Windows. The Adapter plugs into the 9-pin Deutsch diagnostic port of any Class A Motorhome or heavy duty diesel vehicle or yacht. The Adapter is constructed of industrial grade materials, will withstand abuse, and is weather resistant.

Note, the Adapter is not a Truck ELD (Electronic Logging Device) and does not support the Federal Electronic Data Logging requirements.


Important Note, the Adapter is only for 12 volt diagnostic ports. Plugging it into a 24v source will damage the Adapter resulting in an expensive repair.

$230.00

Upgrade a Green 9-pin non-Apple Adapter to an Apple compatible Adapter

Upgrade a Green 9-Pin Android/Windows 10 (not for Apple) Adapter to a Green 9-Pin Apple/Android/Windows 10 Adapter.


Note, you must send us your Adapter along with a copy of this upgrade order to the address below and we will upgrade the adapter and ship it back to you according to your order shipping.


BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

$30.00

Upgrade a Black 9-pin non-Apple Adapter to a Green Apple compatible Adapter

Upgrade a Black 9-Pin Android/Windows 10 (not for Apple) Adapter to a Green 9-Pin Apple/Android/Windows 10 Adapter.


Note, you must send us your Adapter along with a copy of this upgrade order to the address below and we will upgrade the adapter and ship it back to you according to your order shipping.


BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

$50.00

Update the Adapter Firmware

Note, this update now includes the 4.1 hardware upgrade for 3.1 BLE adapters. This upgrade has significant improvements over the 3.1 version but you need to send your Adapter in to get the initial upgrade. Once your Adapter is upgraded, you can use the Firmware Update program for future updates.


Note, you only need to order the update if you're sending your Adapter to us for updating the firmware. Along with sending us your Adapter you also need to include a copy of this update order.


Very Important Note, the 4.1 hardware upgrade changes the App Setting 'Connect to Last Adapter' so if you are using this option, after you receive your updated Adapter, you need to uncheck that setting, connect to the Adapter and then re-check the setting.


Send your Adapter (and a copy of this order) to the address below and we will update the firmware and ship the Adapter back to you according to your order shipping.


BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

$10.00

PressurePro Pulse

The PressurePro Pulse TPMS (Note that the Pulse FX does not work with our App).


Specs and documentation can be found here.


You can find the Pulse at the following locations:


Tire Pressure Monitoring

Vulcan Tire - Scroll down to the Pulse, skip the Pulse FX


You will also need a Pulse 9-Pin Cable and a 9-Pin Y Cable to connect both the Pulse and our Adapter to your diagnostic port.


For questions you can contact PressurePro at this link.

 

See vendor's website for ordering

PressurePro Pulse 9-Pin Cable

9-Pin J1939 data cable for connecting the PressurePro Pulse (not the Pulse FX) to a 9-Pin Y-Cable. This is a data cable only. Your Pulse must be powered externally.


Important Note - This is for the PressurePro Pulse, NOT the Pulse FX.


Note that lead time is 2-3 weeks not including shipping and is not returnable.


This cable is 3 feet in length. If you need a longer length, you can get this 9-Pin Extension cable.


You will also need a 9-Pin Y Cable to connect both the Pulse and our Adapter to your diagnostic port.


Note that the Pulse is primarily used to configure your TPMS tire configuration and send tire data to the BlueFire App. So it does not necessarily need to be on your dash.

$70.00

Repair the Adapter

Before sending in your Adapter for repair you should take a look at the Getting Started Document's Troubleshooting section to ensure that your Adapter needs repairing.


After troubleshooting your Adapter and the LEDs do not light up, then you need to send your Adapter in for repair.


Note, you must send us your Adapter along with a copy of the repair order to the address below and we will notify you the status of your Adapter and/or ship the Adapter back to you according to your order shipping.


BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

$20.00

Upgrade a Black 9-pin non-Apple Adapter to a Green non-Apple Adapter

Upgrade a Black 9-Pin Android/Windows 10 (not for Apple) Adapter to a Green 9-Pin Android/Windows 10 (not for Apple) Adapter.


Note, you must send us your adapter along with your order number to the address below and we will upgrade the adapter and ship it back to you according to your order shipping.


BlueFire LLC
16231 266 Ave SE
Issaquah, WA 98027

$30.00

Adapter Processor Board

Replace the Adapter's processor board if during the repair process it is determined that the processor board was damaged due to external events such as a power spike.

Note, if this is necessary you will be notified during the repair process to purchase this repair.
$95.00

Adapter Power Board

Replace the Adapter's power board and Deutsch connector if during the repair process it is determined that the power board was damaged due to external events such as a power spike.

Note, if this is necessary you will be notified during the repair process to purchase this repair.
$75.00