Connectors and Cables

9-Pin to 6-Pin Connectors

Do you want to connect a 9-Pin BlueFire Adapter to a 6-Pin diagnostic port? Then this is what you need.


These connectors allows you to use a 9-Pin BlueFire Adapter on both a 9-pin vehicle and a 6-pin vehicle.


You can purchase one of these connectors from the following links:


Please Note - You will be purchasing these converters separately from another website and cannot be included in your BlueFire order. Any returns will be through the vendor's website.


Cable with Green 9-Pin. Note, this cable can only be used with the Green 9-Pin Adapter.


Cables with Black and Green 9-Pin. Note, the Green 9-Pin cable can only be used with a Green 9-Pin BlueFire Adapter while the Black 9-Pin connector can be used with either a Green or Black 9-Pin BlueFire Adapter.


Connector with Green 9-Pin. Note, this cable can only be used with the Green 9-Pin Adapter.


Connector with Black 9-Pin. This connector can be used with either a Black or Green Adapter. Recommended if it doesn't stick out too far (5 3/8" including the adapter) and your diagnostic connector is solidly mounted.

See vendor's website for ordering

OBD II to Deutsch 9-Pin Connector

Do you have a vehicle with an OBD II connector but still want to use the BlueFire Adapter? Then this is the connector you need.


This compact connector easily converts the BlueFire Black or Green 9-Pin Adapter to the OBD II connector in your vehicle thus allowing a gas powered light/medium duty truck or motorhome to use the BlueFire Adapter and the BlueFire App.


You can purchase this directly from the manufacturer at this link.

See vendor's website for ordering

Volvo OBD II to Deutsch 9-Pin Connector

Do you have a 2014 or newer Volvo or Mack truck with an OBD II connector but still want to use the BlueFire Adapter? Then this is the connector you need.


This compact connector easily converts the BlueFire Black or Green 9-Pin Adapter to the OBD II connector in your truck.


You can purchase this directly from the manufacturer at this link.

See vendor's website for ordering

OBD II to Deutsch 9-Pin Cable

Do you have a vehicle with an OBD II connector but still want to use the BlueFire Adapter?


This cable converts the BlueFire Black or Green 9-Pin Adapter to the OBD II connector in your vehicle thus allowing a gas powered light/medium duty truck or motorhome to use the BlueFire Adapter and the BlueFire App.


You can purchase this directly from the manufacturer at this link.

See vendor's website for ordering

DDEC ALDL to Deutsch 9 or 6-Pin Cable

Do you have an older vehicle with a 12-pin DDEC ALDL connector but still want to use the BlueFire Adapter?


This cable converts the BlueFire 9 or 6-Pin Adapter to the DDEC ALDL connector in your vehicle thus allowing an older truck or motorhome to use the BlueFire Adapter and the BlueFire App.


Note, the picture and the link below shows the 6-pin connector. Make sure you order the correct item (ALDLto9Madap for a BlueFire 9-pin Adapter or ALDLto6Madap for a BlueFire 6-pin Adapter).


Warning! Ensure that this cable will mate with your diagnostic connector as there are various configurations of diagnostic connectors out there.


You can purchase this directly from the manufacturer at this link.

See vendor's website for ordering

Volvo OBD II to Deutsch 9-Pin Cable

Do you have a newer Volvo truck with an OBD II connector but still want to use the BlueFire Adapter?


This cable converts the BlueFire Black or Green 9-Pin Adapter to the OBD II connector in your truck.


You can purchase this directly from the manufacturer at this link.

See vendor's website for ordering

9-Pin Adapter Extension Cable

An extension cable for a BlueFire 9-Pin Adapter.


This allows you to move the BlueFire Adapter to a different location other than where the diagnostic port is. Very handy for vehicles with rear mounted engines.


Note that if you have a BlueFire Black Adapter you need a Black extension cable.


There are many locations where you can purchase this cable. Just search for J1939 Extension Cable. Amazon has an extension cable for the Green adapters at this link and Ebay has one for both the Green and Black adapters at this link.

See vendor's website for ordering

6-Pin Adapter Extension Cable

An extension cable for a BlueFire 6-Pin Adapter.


This allows you to move the BlueFire Adapter to a different location other than where the diagnostic port is. Very handy for vehicles with rear mounted engines.


There are many locations where you can purchase this cable. Just search for J1708 Extension Cable. Amazon has an extension cable at this link and Ebay has one at this link.

See vendor's website for ordering

9-Pin Adapter Y Cable

A 'Y' cable for connecting a BlueFIre Black or Green 9-Pin Adapter along with another 9-Pin adapter.


Note that if you have a BlueFire Black Adapter you will need a Black 'Y' cable.


For BlueFire for Trucks customers, this works well if you want to run the App along with an ELD adapter.


You can purchase a green adapter cable from Amazon at this link and a black adapter cable from ebay at this link.

See vendor's website for ordering

6-Pin Adapter Y Cable

A 'Y' cable for connecting a Gray 6-Pin Adapter along with another 6-Pin adapter.


For BlueFire for Trucks customers, this works well if you want to run the App along with an ELD adapter.


You can purchase this cable from Amazon at this link.

See vendor's website for ordering