Products tagged with 'Android'

9-Pin Adapter for heavy duty vehicles circa early 2000's to the present.

Note, you must have a compatible diagnostic port to use this Adapter. See the Getting Started document for more info on diagnostic ports.

If you do not have a 9-pin diagnostic port, you can use this Adapter along with a converter cable. See this link for more info on converter cables.

The Adapter comes with the latest firmware and hardware. You do not need to order the firmware update.

Important Note, the Adapter is only for 12 volt diagnostic ports. Plugging it into a 24v source will damage the Adapter resulting in an expensive repair.

Upgrade a Green Bluetooth 2.1 Adapter to a Bluetooth Low Energy (BLE) Adapter.

Send your Adapter along with a copy of this order to the address below and your adapter will be upgraded and shipped back to you according to your order shipping. Turnaround time is usually the day after receiving your adapter.

BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

Upgrade a Black Bluetooth 2.1 Adapter to a Green Bluetooth Low Energy (BLE) Adapter.

Send your Adapter along with a copy of this order to the address below and your adapter will be upgraded and shipped back to you according to your order shipping. Turnaround time is usually the day after receiving your adapter.

BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

Note, this update now includes the 4.1 hardware upgrade for 3.1 BLE adapters. This upgrade has significant improvements over the 3.1 version, but you need to send your Adapter in to get the initial upgrade. Once your Adapter is upgraded, you can use the Firmware Update program for future updates. The Firmware and Hardware changes can be found at this link.

Very Important Notes - With App version 10+, upgrading to the new 4.1 hardware changes the App Setting 'Connect to Last Adapter' so if you are using this option, after you receive your updated Adapter, you need to uncheck that setting, connect to the Adapter and then re-check the setting.

Send your Adapter along with a copy of this order to the address below and the firmware will be updated and your Adapter shipped back to you according to your order shipping. Turnaround time is usually the day after receiving your adapter.

DO NOT Send any Adapter 6-pin or ALDL Connectors, just send the Adapter by itself.

BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

Note, this is a PO Box and we check it every afternoon at the end of the day.

Before sending in your Adapter for repair you should take a look at the Getting Started Document's Troubleshooting section to ensure that your Adapter needs repairing.

After troubleshooting your Adapter and the LEDs do not light up, then you need to send your Adapter in for repair. When repaired your Adapter will have the latest firmware and hardware upgrade.

Send your Adapter along with a copy of this order to the address below. If your Adapter has just a memory corruption, it will be repaired and shipped back to you according to your order shipping. If your Adapter requires a replacement power or processor board, you will be notified that you need to purchase the board.

DO NOT Send any Adapter 6-pin or ALDL Connectors, just send the Adapter by itself.

BlueFire LLC

20250 276th Ave SE

Unit 264

Hobart, WA 98025-5012

Note, this is a PO Box and we check it every afternoon at the end of the day.

Replace the Adapter's processor board if during the repair process it is determined that the processor board was damaged due to external events such as a power spike.

Note, Do Not order this unless instructed to. If this is necessary, you will be notified during the repair process. This can only be sent along with the repaired adapter.