Cummins ISX 15 605 HP, I have a question about the low engine oil pressure alarm. When stopping at a red light the oil pressure naturally drops below the setting of a desirable alarm point for when I am running under load. If I set the alarm point to 15 (for example) I lose the protection needed when under load.
The commercial engine industry solved this issue by having two alarm points. For example, at idle would be 9 psi and under load would be 30 psi. Engine rpm settings would be used to switch between the set points. Would this upgrade be possible?
Until then, is there a way to delay the low pressure alarm for a few seconds? Currently, when I drop to an idle the pressure will drop below 15 psi just for a moment then settle ar 20 psi. With no delay on the alarm I have to choose between setting the alarm point below 15 or put up with getting nuisance alarms.
Thanks, BTW, love your product!
The commercial engine industry solved this issue by having two alarm points. For example, at idle would be 9 psi and under load would be 30 psi. Engine rpm settings would be used to switch between the set points. Would this upgrade be possible?
Until then, is there a way to delay the low pressure alarm for a few seconds? Currently, when I drop to an idle the pressure will drop below 15 psi just for a moment then settle ar 20 psi. With no delay on the alarm I have to choose between setting the alarm point below 15 or put up with getting nuisance alarms.
Thanks, BTW, love your product!
