Picture of 9-Pin J1939/J1708 Bluetooth Classic Adapter for Android and Amazon(Not Apple)

Sorry - this product is no longer available

9-Pin J1939/J1708 Bluetooth Classic Adapter for Android and Amazon(Not Apple)

The BlueFire Data Adapter is an electronic device that connects to a truck, yacht, motorhome, (and more) on-board computers (ECUs) and transmits information wirelessly via Bluetooth to BlueFire Apps, a mobile application that runs on Apple, Android, and Amazon. The Adapter plugs into the Black (NOT Green) 9-pin Deutsch diagnostic port of any Class A Motorhome or heavy duty diesel vehicle or yacht. The Adapter is constructed of industrial grade materials, will withstand abuse, and is weather resistant.
Availability: Out of stock
$180.00

Key attributes of the adapter are:

  • Supports J1939 and J1708 standard data messages. Check your diagnostic port for a black 9-pin female connector. If your connector is Green you need the Green adapter. Older vehicles use a 6-pin connector which converter cables are available here at the store.

  • Small form factor with a Deutsch 9-pin twist lock connector. The adapter can be locked in for long term use and will not interfere with driving. Power management is available for long term downtime.

  • Anodized aluminum casing with a lexan translucent cap. The Deutsch plug is sealed and the electronics are weather resistant. The LED brightness can be adjusted to suit individual drivers.

  • Communicates wirelessly with Android and Amazon Tablets.

  • Made in America. Need we say more?
Products specifications
Attribute nameAttribute value
Connection9 Pin
SpecificationJ1708, J1939
Connector ColorBlack
Bluetooth2.1 Classic
Operating SystemAndroid, Windows 10
Product tags
Customers who bought this item also bought
Picture of 9-Pin J1939/J1708 Green Bluetooth LE Adapter for Apple, Android and Amazon

9-Pin J1939/J1708 Green Bluetooth LE Adapter for Apple, Android and Amazon

9-Pin Adapter for heavy duty vehicles circa early 2000's to the present.



Note, you must have a compatible diagnostic port to use this Adapter. See the Getting Started document for more info on diagnostic ports.



If you do not have a 9-pin diagnostic port, you can use this Adapter along with a converter cable. See this link for more info on converter cables.



The Adapter comes with the latest firmware and hardware. You do not need to order the firmware update.



Important Note, the Adapter is only for 12 volt diagnostic ports. Plugging it into a 24v source will damage the Adapter resulting in an expensive repair.

$240.00
Picture of PressurePro Pulse 9-Pin Cable

PressurePro Pulse 9-Pin Cable

9-Pin J1939 data cable for connecting the PressurePro Pulse (not the Pulse FX) to a 9-Pin Y-Cable. This is a data cable only. Your Pulse must be powered externally.


Important Note - This is for the PressurePro Pulse, NOT the Pulse FX.


Note that lead time is 2-3 weeks not including shipping and is not returnable.


This cable is 3 feet in length. If you need a longer length, you can get this 9-Pin Extension cable.


You will also need a 9-Pin Y Cable to connect both the Pulse and our Adapter to your diagnostic port.


Note that the Pulse is primarily used to configure your TPMS tire configuration and send tire data to the BlueFire App. So it does not necessarily need to be on your dash.

$70.00
Only registered users can write reviews