4.2.0 Updates: 3/1/2026
• Better memory management with substantially less risk of memory corruptions.
• A user factory reset cycle is now performed only after a power cycle.
• The Adapter will go to sleep right after the user factory reset cycle.
• When not connected, the Adapter will reboot every two hours.
• When the App disconnects from the Adapter, the Adapter will reboot. If the Adapter is set to sleep it will immediately go to sleep.
• When the Adapter reboots, the LEDs will blink cyan for 8 seconds if not sleeping, otherwise (sleeping) the LEDs will blink a dim cyan quickly.
• Power cycling is fine during a reboot but App connection will wait.
• Adapter firmware updates are now no cost with free USPS ground shipping.
4.2.1 Updates: 3/8/2026
• Fixed Adapter locking up when first plugged in (requires re-plugging in).
• Saving Device Name and MAC Address in case it cannot be retrieved.
• Reduced LED brightness in half for cyan, yellow, and magenta LEDs.
• Updated the Firmware Update program to version 12.2.0.
4.2.2 Updates: 3/10/2026
• Reduces the likelihood of raising a J1708 ECM J1587 fault (eg. "No J1587 DATA") when plugging in the Adapter.
4.2.3 Updates: 3/24/2026
• Fixed J1708 not setting the App's Key On (solid blue Led) when connecting with the ignition key on.
• Better memory management with substantially less risk of memory corruptions.
• A user factory reset cycle is now performed only after a power cycle.
• The Adapter will go to sleep right after the user factory reset cycle.
• When not connected, the Adapter will reboot every two hours.
• When the App disconnects from the Adapter, the Adapter will reboot. If the Adapter is set to sleep it will immediately go to sleep.
• When the Adapter reboots, the LEDs will blink cyan for 8 seconds if not sleeping, otherwise (sleeping) the LEDs will blink a dim cyan quickly.
• Power cycling is fine during a reboot but App connection will wait.
• Adapter firmware updates are now no cost with free USPS ground shipping.
4.2.1 Updates: 3/8/2026
• Fixed Adapter locking up when first plugged in (requires re-plugging in).
• Saving Device Name and MAC Address in case it cannot be retrieved.
• Reduced LED brightness in half for cyan, yellow, and magenta LEDs.
• Updated the Firmware Update program to version 12.2.0.
4.2.2 Updates: 3/10/2026
• Reduces the likelihood of raising a J1708 ECM J1587 fault (eg. "No J1587 DATA") when plugging in the Adapter.
4.2.3 Updates: 3/24/2026
• Fixed J1708 not setting the App's Key On (solid blue Led) when connecting with the ignition key on.