1. The Orientation dash feature has been removed. Only a single dash is now used and will be shown in both portrait and landscape orientation.
   
2. You can lock the dash orientation so it always shows in the same orientation otherwise it will be shown as designed in the device orientation.
   

1. The adapter connection has been improved.
   
2. Windows no longer required a paired BLE adapter.
   

1. DPF Intake Temp and DPF Exhaust Temp is now retrieved from the ECM (if available).
   
2. The temperature values are shown in the Drive page and are available to design into your custom dash as a Text and/or Graphic gauge.
   

1. Gauge alerts can now speak custom text along with or in lieu of the audio alert.
   
2. You can adjust the TTS pitch and volume separately from the audio volume.
   
3. TTS is available at the System level (Settings page), the Dash level (Customize Dash page) or the individual Gauge level (Customize Gauges page).
   

1. Renamed 'Warning 1 Range Value' to 'Warning Low Range' and is now the Warning range to the Left (Low) of the Good range.
   
2. Renamed 'Warning 2 Range Value' to 'Warning High Range' and is now the Warning range to the Right (High) of the Good range.
   
3. Renamed 'Danger 1 Range Value' to 'Danger Low Range' and is now the Danger range to the Left (Low) of the Good range.
   
4. Renamed 'Danger 2 Range Value' to 'Danger High Range' and is now the Danger range to the Right (High) of the Good range.
   
5. Gauge alerts can now be assigned for each Gauge Range (Warning Low, Warning High, Danger Low, Danger High).
   

1. The startup orientation dash will be selected as the main dash.
   
2. The orientation dashes will be moved to the Dashes folder under the names of 'My Portrait Dash v4.2.0' and 'My Landscape Dash v4.2.0'.
   

1. Improved the Adapter connection.
   

1. Added DPF Intake Temp and DPF Exhaust Temp gauges.
   
2. The 'Lock Dash Orientation' now defaults to true.
   
3. Replaced the 'Alert Count' and 'Alert Timeout' options with a 'Range Alerts' option.
   
4. Added Show Alert, Audio File, Audio Volume, TTS Text, Pitch, and Volume to each Range option.
   
5. The 'Range Alerts' options default to the System 'Audio Alerts' options.
   
6. The 'Range Alerts' options will update all gauge Range options when changed.
   
7. Fixed the Simple Dash option not arranging gauges in rows properly.
   

1. Renamed the 'Warning 1 Range Value' option to 'Warning Low Range'.
   
2. Renamed the 'Warning 2 Range Value' option to 'Warning High Range'.
   
3. Renamed the 'Danger 1 Range Value' option to 'Danger Low Range'.
   
4. Renamed the 'Danger 2 Range Value' option to 'Danger High Range'.
   
5. Moved the Range Value, Show Alert, Alert Count, and Alert Timeout options into each Range option.
   
6. Added TTS Text, Pitch, and Volume to each Range option.
   
7. Range options default to the Customize Dash 'Range Alerts' option.
   
8. The gauge will now show with the dash background color.
   
9. Fixed the RPM graphic gauge not testing the full gauge range.
   
10. Fixed navigating away from the page while the page is testing and showing a Compass gauge (only Android).
    

1. Range alerts will be shown in Demo mode.
   
2. Fuel Fill is only allowed when Fuel Used is available.
   
3. Single tapping Text gauges will be ignored if they're not visible.
   
4. Trip text gauges will always show the current trip data.
   
5. Navigating back to the trip page will always show the current trip.
   
6. Fixed gauges changing position when locked.
   
7. Fixed Simple Dash causing system errors.
   
8. Fixed the RPM graphic gauge not testing the full gauge range.
   
9. Fixed App crashing when panning/pinching with a GPS enabled gauge (eg. Compass) on the dash.
   

1. Fuel Fill is only allowed when Fuel Used is available.
   
2. Selecting a previous trip will show all the trip data
   
3. Trip notes will be included in the trip email.
   
4. The Trip name will change to a new date-time stamp if the same trip name is detected when starting a new trip.
   
5. Fixed the trip report showing DEF Economy incorrectly.
   
6. Fixed starting a trip with the ignition key off and showing the 'Not Connected' alert.
   

1. Added 'DPF Exhaust Temp' and 'DPF Intake Temp' values.
   

1. Added a 'Test Adapter' option.
   
2. Added TTS Text, Pitch, and Volume to 'Audio Alerts'.
   
3. The 'Lock App Orientation' option now defaults to true.
   
4. Setting the 'Lock App Orientation' option will show page text fully across the page in landscape orientation.
   
5. Fixed the Secondary Fuel Tank Capacity not being updated when changing to Dual Fuel Tanks after setting a Single Fuel Tank.
   

1. Checkboxes are thinner.
   
2. Windows no longer requires a paired BLE adapter.
   
3. Added a degree symbol to the temperature unit of measure.
   
4. Added support for J1708 extended boost pressure (2002 and newer).
   
5. Internal changes.
   

1. Updated to version 3.5.
   
2. Updated overall document.
   

1. The Android rotating dial compass gauge's value or the gauge itself may occasionally disappear.
   

1. Improved location permission detection.
   
2. A prompt to enter email address will be shown on new installations or if the email address is missing.
   

1. The Compass gauge will function with the ignition off.
   
2. The Compass, Direction, and Elevation gauges will show actual values in Demo mode.
   
3. Gauges are reset to 0 when the ignition key is turned off.
   
4. Fixed the Circular gauge needle not showing correctly for iOS Circular gauges with the 'Counter Clockwise' option set.
   

1. Fixed system error caused by downloading a dash and not waiting for the download to finish before navigating away from the page.
   

1. Trip data will be maintained when the ignition is turned off.
   

1. The TPMS option no longer causes a system error.
   

1. Fixed adapter disconnecting when the App is busy or when an alert is shown.
   
2. Internal changes to fix adapter connection issues.
   

1. The Email address prompt now allows for cancelling (but it will return when navigating to the Home page).
   

1. Fixed Text gauges changing height when locked.
   
2. Text gauges will show alerts if alerts were previously set on.
   

1. Clearing Audio Alert fields will set them to their default values.
   

1. Clearing Audio Alert fields will set them to their default values.
   
2. Resetting a Text graphic gauge will reset it's corresponding Graphic gauge if the Graphic gauge is not on the dash.
   

1. The Show Transmission/Aftertreatment button is shown when returning to the page from another page.
   

1. Clearing Audio Alert fields will set them to their default values.
   

1. Fixed erroneous system errors.
   
2. Fixed new firmware version system error.
   
3. Updated incorrect Demo Data.
   
4. Updated Graphic gauges that do not have a Good range value.
   

1. Updated to version 3.6.
   

Edited by user Tuesday, December 22, 2020 2:15:35 PM(UTC)  | Reason: Not specified