1. Added separate Portrait and Landscape dashes that will be loaded according to the Home page orientation.
   

1. Customize Dash options 'Scroll Vertical' and 'Scroll Horizontal' can be set for scrolling your dash vertically, horizontally or both.
   

1. Added 'Next Page' and 'Prev Page' text gauges that allow for designing and navigating a mult-page custom dash (vertical or horizontal).
   

1. Added the ability to create day and night custom Icon gauges (Home, Back, Next Page, Prev Page, Fuel Fill Up, Cruise Control, Engine Status, Tire Pressure).
   

1. Alerts will now show banner notifications on your mobile device.
   
2. Multiple simultaneous alerts will be shown stacked on top of each other.
   
3. Added a 'Gauge Alerts' tip to the Getting Started document.
   

1. Sharing your dash will now send all dash images along with the dash.
   
2. Importing a shared dash now allows for importing dash images.
   

1. Trip locations can now be overridden with a manual entry of city and state. City and state can be entered in lower case without a comma and they will be automatically formatted with a two letter state set to all caps.
   

1. Added an option to the Settings page that resets ECM data used for trip data and for calculating average fuel economy, fuel remaining, and distance remaining when not connected to the adapter. Try this if you trip data is not being calculated correctly.
   

1. The PressurePro Pulse is fully supported. See the website/store for more info.
   

1. Added an option to the Settings page to manually enter the VIN so that it can be shown on reports but does not need to be retrieved from the ECM.
   

1. Added separate Portrait and Landscape dashes.
   
2. The dash can now be scrolled vertically, horizontally, or in both directions.
   
3. A Fuel Capacity warning is shown if Fuel Remaining or Distance Remaining are selected and Fuel Tank Capacity is not entered.
   
4. The Time text gauges (Local, Home, Dual) are now updated whenever the dash is displayed (as opposed to only when connected).
   
5. Moving (drag and drop) a gauge beyond the end of the first page now shows all the pages after moving.
   
6. The Customize Gauges 'Show Warning Alert' and 'Show Danger Alert' options will be updated when returning from the Customize Gauges page.
   
7. Gauge alerts with a timeout value will show the initial value on the alert.
   
8. Gauge alerts will now show device banner notifications. Previous notifications will be cleared when re-showing the dash or starting the App.
   
9. Multiple gauge alerts will show stacked on top of each other and the number of audio alerts sounded will be determined by the highest 'Alert Count' option of the gauge alerts.
   
10. An incorrect orientation dash will show as designed and no longer stack all gauges in the upper left corner.
    
11. Navigating to the Customize Dash page (single/double tap) will no longer return to the View Dash page (use the Show Dash button instead).
    
12. Fixed App crashing in iOS when tapping on a Map gauge in landscape mode.
    

1. Removed the 'Lock Orientation' option.
   
2. Renamed the 'Scroll Gauges' option to 'Scroll Vertical'.
   
3. Added a 'Scroll Horizontal' option for scrolling your dash horizontally.
   
4. Renamed the 'Previous Page' text gauge to 'Back'.
   
5. Added 'Next Page' and 'Previous Page' text gauges that will scroll your dash a full page at a time either vertically or horizontally.
   
6. Added a separate Navigation Map Text gauge that replaces the Text gauge with the Navigation Map option.
   
7. Removed the 'Home' button in landscape mode since the Navigation Bar is now shown.
   
8. A "Welcome" message will be shown if the dash contains no gauges.
   
9. The 'Alert Count' option can now be set to 0 to mute all alerts.
   
10. The 'Save/Upload' button is reset to 'Save' after an upload.
    
11. The 'Share Dash' option sends all image files along with the dash file.
    
12. The 'Import Dash' option allows importing of image files.
    
13. The 'Show Dash' and 'Customize Gauges' buttons will only allow one tap/click.
    
14. The 'Use Gauge Template' option will be cleared when clearing the dash.
    
15. The 'Use Gauge Template' option must now be selected for assigning a template to new Graphic gauges.
    
16. Uploaded custom dashes will be reviewed by BlueFire Support before being made available.
    
17. Added an alert to the 'Add or Remove ... Gauges' options when a Template gauge is defined and the 'Use Template Gauge' option is not set.
    
18. Fixed an issue where assigning a Template gauge could remove an Icon gauge's image.
    
19. Fixed App crashing when Snap to Grid sizes are set to 0.
    
20. Fixed App crashing when encountering corrupted data from a downloaded dash.
    
21. Gauge related options are not shown if no gauges are selected.
    
22. Renamed the 'Auto Saved Dash' dash name to an orientation specific name ('Auto Saved Portrait' or 'Auto Save Landscape').
    
23. Renamed the 'My Custom Dash' dash name to an orientation specific name ('My Custom Portrait Dash’ or ‘My Custom Landscape Dash').
    
24. The Load, Save, Share, Import pages will navigate back to the Customize Dash page with the back button or arrow.
    
25. AutoSave will now save whenever the View Dash, Customize Dash, or Customize Gauges pages exit and the dash was changed. To cancel any changes made in those pages, quit the App, restart it, go to the Customize Dash page (via Settings) and Load the AutoSave dash.
    

1. Added the ability to create day and night custom Icon gauges (Home, Back, Next Page, Prev Page, Fuel Fill Up, Cruise Control, Engine Status, Tire Pressure).
   
2. The 'Alert Count' option can now be set to 0 to mute the alert.
   
3. The Backup and Restore pages will navigate back to the Customize Gauges page with the back button or arrow.
   

1. Any location can be changed by entering the city and state. The state can be separated by a comma or be the two letter abbreviation.
   
2. Fixed ending a trip not ending due to a missing trip name.
   
3. Added a warning if starting a trip with the ignition key off.
   
4. The options 'Partial Fuel Fill' and 'Non-Engine Fuel Used' can now be updated prior to starting a trip.
   
5. Changed the 'Ignore Location' option to 'Ignore GPS Location' and now works properly.
   
6. Changed The 'Fuel Level' section to 'Fuel Remaining' and now shows both fuel remaining and fuel level.
   
7. Demo trip data will no longer get mixed up with real trip data.
   
8. A demo trip will show actual locations rather than demo locations.
   
9. Connecting to the adapter is not allowed if a demo trip has been started.
   

1. Orientation is locked according to the Home page orientation.
   
2. Separate Portrait and Landscape dashes will be loaded accordingly when the orientation is changed.
   

1. Changed the 'Ringtone' option to 'Audio Alert'.
   
2. Added a 'Reset ECM Data' option for resetting ECM data used for trips and fuel economy when not connected to the adapter.
   
3. Added a 'Motorhome VIN' option that allows you to manually enter your Motorhome VIN. Note, this is visible only if the 'Ignore Motorhome Info' option is checked.
   
4. Added a warning alert for selecting a Bluetooth BLE adapter with an Android version 5 device.
   
5. The 'RPM Interval' option no longer allows for intervals less than 100 ms.
   
6. The 'Bluetooth Recycle Attempt' option is not shown for Apple devices (not applicable since the App is not allowed to turn on/off Bluetooth).
   
7. Fixed using the 'Force Portrait/Landscape' settings for iPads.
   
8. Added 'Backup App' and 'Restore App' options for Android devices. This allows access to the App data that is no longer available.
   

1. Better Bluetooth connection.
   
2. The Navigation Bar is now shown in landscape mode.
   
3. The 'CAN Filter Full' message will only show once per page view.
   
4. Windows App can now be minimized for a short period of time.
   
5. Fixed various iOS App crashes.
   
6. The App now caters for the iOS 11+ notch when in landscape mode.
   
7. Fixed Windows not showing edited fields on the Trip, Logging, Faults, and TPMS pages.
   
8. Android and Windows Apps now show the word 'Demo' for demo data rather than 'Default'.
   
9. The BlueFire App for Android's App data is no longer user accessible and will be deleted when the App is uninstalled.
   

1. Updated to version 2.2.
   
2. Added a section on Trips.
   
3. Added a section on TPMS.
   
4. Added a tip on Gauge Alerts.
   
5. Added a tip on Auto Resizing.
   
6. Added a tip on Dash Orientation.
   
7. Added a tip on Customizing Icon Gauges.
   
8. Added additional information on Auto Save.
   
9. Added additional information on App Orientation.
   
10. Added additional information on Internet features.
    

1. Fixed system error when showing a Simple Dash.
   
2. Showing a map pauses the Adapter heartbeat while the map is being displayed.
   

1. Downloading a dash with not enough memory will show an alert.
   

1. Fixed system error when opening pages after being connected to the adapter.
   

1. The 'Distance Remaining' text gauge will show Trip Distance Remaining if a trip has been started.
   

1. Fixed system error when opening pages while connecting to the adapter.
   

Edited by user Monday, May 11, 2020 6:21:44 PM(UTC)  | Reason: Not specified