1. Cruise State will show
   
   1. On = Cruise On and Active
      
   2. Off = Cruise Off and not Active
      
   3. Pause = Cruise Off and Active
      
   4. Ready = Cruise On but not Active
      
2. Cruise Set Speed will always show the set speed.
   
3. Fixed System Errors that were occurring when viewing the dash.
   
4. Fixed the long update delay of Boost and Oil Pressures with the new 'Performance' Settings option.
   
5. The 'CAN Filter Full' message can be fixed by checking the 'Ignore Truck Info' setting. See the Getting Started document for more information.
   

1. Added a 'Fuel Rate' Text Gauge.
   
2. Added a 'Retarder Temp' Text and Circular Gauge.
   
3. Added a 'Coolant Pressure' Text and Circular Gauge.
   
4. Added a warning alert on gauge reset.
   
5. Added a 'GotIt' alert to the adapter connected warning message.
   
6. Added a Dash Resize warning if one or more gauges are beyond their size limits.
   
7. Gauges that are removed and then re-added will revert to their default or template values.
   

1. Color selection now shows after a reset.
   
2. Text Gauge 'Warning Range' colors are updated correctly.
   
3. The 'Reset' button only resets the day or night colors.
   
4. The 'Update Gauges' button is disabled if there are no gauges.
   

1. Added a warning alert on gauge reset.
   
2. Added a 'GotIt' alert to the adapter connected warning message.
   

1. Fixed system error when resetting gauge colors.
   
2. Color selection now shows after a reset.
   
3. Removed the 'Apply' button.
   
4. Colors are updated when the gauge is updated.
   
5. The 'Reset' button only resets the day or night colors.
   

1. Buttons show as they should.
   
2. All features work in Demo mode.
   
3. Trips can be started and ended without having to be connected to the adapter.
   
4. Trips will save 'Total Hours', 'Idle Hours', and 'Idle Fuel Used' when disconnecting before ending the trip.
   
5. Added a notice about double tapping location to see info and a map.
   
6. Previous trips are shown in trip order (newest first).
   

1. Fault pages work as they should in connected and demo mode.
   
2. Fault notices are shown as 'GotIt' alerts.
   
3. Saved faults are shown in saved date order (newest first).
   
4. Removed the maximum number of dealers restriction in 'Find a Dealer'.
   

1. Added Retarder Temperature.
   
2. Data Logging works in Demo mode.
   
3. Log files are shown in date order (newest first).
   
4. Fixed System Error when starting logging with nothing to log.
   

1. Added 'Show Engine VIN' to Settings. This complements the 'Show Truck VIN' setting.
   
2. Removed the 'Do Not Show Fault Notice' setting and replaced it with 'GotIt' alerts in the Faults Page.
   
3. Moved 'Performance Mode' from Settings/System to Settings and renamed it 'Performance'.
   
4. Added 'Performance 1' and 'Performance 2' to the 'Performance' setting.
   
5. Performance 1 fixes the long delay in updating Boost and Oil Pressures.
   
6. Removed the Dealer Search Order restriction of one dealer.
   
7. The Adapter Factory Reset now performs a factory reset. Previously it only rebooted the adapter.
   
8. Resetting the adapter requires you to unplug the adapter and plug it back in.
   
9. Resetting the adapter no longer attempts to reconnect.
   

1. Truck VIN is now being retrieved when requested.
   
2. Default data (Demo mode) is consistent throughout all pages.
   
3. All App page line separators will take on the line separator custom color.
   
4. Page buttons will show correctly if the 'Adjust Font Size' setting is used.
   
5. iOS 'GotIt' alerts show 'GotIt' above 'Remind Me Again'.
   
6. Pre-3.7 version dashes convert font size correctly.
   
7. Renamed dash file Gauges.xml to Dash.xml.
   
8. The Getting Started document has been updated (v1.2).
   

Edited by user Thursday, June 27, 2019 2:00:13 AM(UTC)  | Reason: Not specified