logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Mark  
#1 Posted : Sunday, January 7, 2018 8:19:13 PM(UTC)
Mark

Rank: Administration

Groups: Administrators
Joined: 4/12/2014(UTC)
Posts: 652

Was thanked: 12 time(s) in 10 post(s)
Firmware Version 3.15 has been released and is out on our Dropbox folder.

To find out which file to use, connect your adapter to the BlueFire App and go to the About page. If the Adapter Hardware shows 2.1, use the 2.1-p-n.n file where p is 6 for 6-pin adapters and 9 for 9=pin adapters. If the Adapter Hardware shows 3.1, use the 3.1-p-n.n file. If the Adapter Hardware show 1.1, you will have to send the adapter back to us for updating.

Changes include:
  • Added OBD2 support. Requires App version 4.12+.
  • Connection to the ECMs now occurs after it receives all connection parameters from the App. Requires App version 4.12+.
  • ELD recording supports retrieving all packets at once for a RTS (conversational) VIN. Requires App version 4.12+.
  • ELD recording supports a BAM (broadcasted) VIN.
  • ELD recording sets Speed to 0 when driving is stopped and sets RPM to 0 when engine is off.
  • When ELD is started or when the ignition key is turned on, the ELD EngineStart record waits for up to 10 seconds for VIN, Distance and Total Hours.
  • After ELD engine is started, Total Hours is requested every 5 seconds (from one second).
  • Internal improvements.

Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.