logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Mark  
#1 Posted : Wednesday, October 25, 2017 9:22:38 PM(UTC)
Mark

Rank: Administration

Groups: Administrators
Joined: 4/12/2014(UTC)
Posts: 656

Was thanked: 12 time(s) in 10 post(s)
Updates:

  • Trip Page updates:
    1. Added Country and GPS Coordinates to Trip data.
    2. Shows the start trip location on the new trip page.
    3. Displays messages (no network, no GPS, location not found) if the start trip location cannot be retrieved.
    4. Shows the new trip page after cancelling a trip or starting a new trip.
    5. Shows GPS coordinates if City or State are not found.
    6. Ending a Trip will alert if End Location is not found.
    7. Locations fields allow double tap to see detail location data and a map.
    8. Shows real-time data if in Demo mode, is registered, and the 'Do not show Demo Mode' setting is checked.
  • IFTA Page updates:
    1. Added Country and GPS Coordinates to IFTA data. IMPORTANT NOTE: You must email and delete your current IFTA file before starting a new one.
    2. Shows GPS coordinates if State is not found.
    3. Records traveling through Canadian provinces.
    4. Double tapping IFTA location will allow mapping the location.
    5. Shows real-time data if in Demo mode, is registered, and the 'Do not show Demo Mode' setting is checked.
  • Security Updates:
    1. Added Device Id security which secures the adapter to the device (phone, tablet, etc).
    2. Security User Name and Password length can be any length.
    3. All security options (Device Id, Adapter Id, UserName and Password) are encrypted with AES encryption.
    4. Security User Name and Password is only available with Firmware 3.9- and 3.14+.
    5. Security is now performed in the adapter with firmware 3.14.
    6. User Name and Password - compatible across all platforms. Authenticates any device with correct username and password. Many to many relatiohship.
    7. Adapter Id - compatible between Android and Win10, unique to iOS. Authenticates between devices and adapter. One to one relationship.
    8. Device Id - unique between all platforms. Authenticates only with device and adapter(s). One device to many adapters relationship. Set when app is first installed.
    9. A 'Reset Security' System Setting is available for resetting the Security Adapter Id, User Name, and Password. It requires an Internet connection and pre-authorization. You will need to factory reset the adapter to clear out it's security settings. You can use this in lieu of resetting the App and losing all your data. Contact BlueFire Support for pre-authorization.
  • Other updates:
    1. Fixed System Error in Faults page when no faults are displayed.
    2. Better retrieval of GPS address (city, state, country).
    3. Dealer search from the Faults page is limited to one dealer and 2 search results if in Demo mode and user is not registered.
    4. Auto email faults will be sent when either the VIN, UnitNo, or SerialNo exists.
    5. Initial ELD recording does not lose the first two records (Start, DriverId) and will be shown in the ELD page.
    6. Setting just ELD Recording while Disconnected uploads correctly.
    7. The Home page will attempt to connect as many times as 'Adapter Connection Attempts' is set.
    8. The Home page Disconnect button will wait for the adapter to disconnect.
    9. The App will now reconnect when the Ignore CAN or J1708 settings are changed.
    10. For iOS 10+ devices, the App will re-connect after disconnection without having to force close the app.
    11. For iOS devices, the App will re-connect while running in the background.
    12. For Android devices, Bluetooth will not be turned off when the App exits it if it is started by the App.
    13. Setting 'Remember Truck Data on Exit' saves data correctly.
    14. System setting 'Adapter Connection Attempts' defaults to 5 and is no longer automatically set.
    15. System setting 'Adapter Reconnection Attempts' default is changed from 10 to 5.
    16. System Setting 'Advertisement Timeout' will automatically be set if it is set to 0. This can speed up BLE connection.
    17. System Setting 'Adapter Minimum Interval' defaults to 100 ms. If you have data retrieval issues, change this back to 500 ms.
    18. System Settings 'Use Bluetooth Low Energy' and 'Use Bluetooth Classic' no longer require the App to be restarted.
    19. System Settings 'Use Bluetooth Low Energy' and 'Use Bluetooth Classic' will not be displayed while connected to the adapter.
    20. More reliable BLE connection.
    21. Compatible with all 3.x Adapter firmware versions.

    Edited by user Friday, November 24, 2017 11:01:07 AM(UTC)  | Reason: Not specified

  • Users browsing this topic
    Similar Topics
    re: Version 4.10 - Advertisements? (General Discussion)
    by honico 11/6/2017 11:26:02 AM(UTC)
    Forum Jump  
    You cannot post new topics in this forum.
    You cannot reply to topics in this forum.
    You cannot delete your posts in this forum.
    You cannot edit your posts in this forum.
    You cannot create polls in this forum.
    You cannot vote in polls in this forum.