logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jrusselltx  
#1 Posted : Monday, January 11, 2021 1:35:26 PM(UTC)
jrusselltx

Rank: Member

Groups: Registered
Joined: 11/5/2019(UTC)
Posts: 20
United States
Location: Texas

Starting a few days ago, I started getting a pop up message that a serious error had occurred and that logs had been sent to the developer. After that, much of the display stopped updating (such as trip distance). Not sure if logs were actually sent, or what the cause is. I have used this version since it was released without this issue. Any updates?

(Android version on a samsung tablet)
Mark  
#2 Posted : Monday, January 11, 2021 1:42:46 PM(UTC)
Mark

Rank: Administration

Groups: Administrators
Joined: 4/12/2014(UTC)
Posts: 653

Was thanked: 12 time(s) in 10 post(s)
Nothing received, try sending it manually (Settings/Send the Event Log).
Mark  
#3 Posted : Monday, January 11, 2021 2:58:57 PM(UTC)
Mark

Rank: Administration

Groups: Administrators
Joined: 4/12/2014(UTC)
Posts: 653

Was thanked: 12 time(s) in 10 post(s)
The App is receiving too many Bluetooth write failures so it issues a system error. The next version will not issue a system error, it will just disconnect and reconnect the adapter. Just curious, is there anything else running on your tablet or is the BlueFire App dedicated?
jrusselltx  
#4 Posted : Monday, January 11, 2021 9:00:47 PM(UTC)
jrusselltx

Rank: Member

Groups: Registered
Joined: 11/5/2019(UTC)
Posts: 20
United States
Location: Texas

Nothing else is running on the tablet except Bluefire. However, since the last trip I did finish a solar install and there are 3 Victron devices running that all have Bluetooth communications active and they are right behind the drivers seat in the compartment below. Could it be interference from those devices causing BT congestion?
Mark  
#5 Posted : Tuesday, January 12, 2021 11:06:21 AM(UTC)
Mark

Rank: Administration

Groups: Administrators
Joined: 4/12/2014(UTC)
Posts: 653

Was thanked: 12 time(s) in 10 post(s)
Don't know as I'm not that kind of expert. Maybe experiment by switching them off? You can also pick up a J1939 extension cable and move the adapter. But first try some of the connection issue suggestions in the Getting Started document in the Retrieving Data section.
jrusselltx  
#6 Posted : Monday, January 18, 2021 5:52:20 PM(UTC)
jrusselltx

Rank: Member

Groups: Registered
Joined: 11/5/2019(UTC)
Posts: 20
United States
Location: Texas

Turned all of the Victron devices off that use Bluetooth (3 of them and that seemed to have fixed the issue. Two days of travel and about 850 miles and no crashes.
Mark  
#7 Posted : Monday, January 18, 2021 6:23:16 PM(UTC)
Mark

Rank: Administration

Groups: Administrators
Joined: 4/12/2014(UTC)
Posts: 653

Was thanked: 12 time(s) in 10 post(s)
Interesting. Good to know. Maybe post this on the IRV2 forums for others to know about?
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.