logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jrusselltx  
#1 Posted : Monday, January 18, 2021 6:02:47 PM(UTC)
jrusselltx

Rank: Member

Groups: Registered
Joined: 11/5/2019(UTC)
Posts: 20
United States
Location: Texas

I have a seen significant differences between the fuel gauge on the dash and the fuel used calculation. For example, the gauge showing just 1/16 of a tank left and the fuel used at 27.3 gallons left. So for the last two fillups I tried to get the tank as full as possible (should be 100 gallons) and took notes of the gallons remaining. Fuel added was 80.0 gallons in one case and 69.1 in the other. If I average those two fill ups then the fuel consumption being reported is 10.06% low. This is without the generator running so that is not a source of error. Is there a way to calibrate the fuel usage rate in the software? I found the place to adjust the total fuel used but that is an after the fact adjustment. In my previous coach with an ISC engine and an Alladin display system this statistic was pretty much dead on. That is the only comparison I can make.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.