Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Mark  
#1 Posted : Wednesday, January 16, 2019 12:22:55 PM(UTC)
Mark

Rank: Administration

Groups: Administrators
Joined: 4/12/2014(UTC)
Posts: 294

Was thanked: 8 time(s) in 7 post(s)
Updates:

  • App Startup and About Page:
    1. Added a What's New page showing all changes.
  • Fault Page
    1. The current fault will be shown when deselecting a selected fault.
    2. A J1708 fault will show the correct source (MID).
    3. The 'Find Dealer' button will not be displayed if the Settings 'Do Not Use GPS' option is set.
  • Settings Pages
    1. Added a 'Custom Colors' setting that allows customization of all App colors.
    2. Added a 'Ignore Truck Data' option. Recommended for J1708 (6-pin) trucks.
    3. Added monitoring J1708 PIDs to the System/Advanced Function settings.
  • Fuel Tank Settings (Settings Page)
    1. Added a 'Ignore Fuel Gauge' option that will ignore your Fuel Level gauge and calculate Fuel Remaining using Fuel Used since the last fill up of your fuel tank(s).
    2. Added a 'Show Calculated Fuel Level Gauge' option that will show the Fuel Level gauge using the calculated Fuel Remaining instead of the ECM reading.
  • Customize Dash Page
    1. The 'Reset Dash' button has been changed to 'Clear Dash'.
    2. Clear Dash only clears the gauges while leaving the other settings alone (size, etc).
    3. The 'Show Darker Gauges' option has been removed in lieu of the 'Custom Colors' settings.
    4. Added a 'Auto Save' option that will automatically save the Dash when you add or remove a Gauge, return from viewing an unlocked Dash, or navigate to the Customize Gauges page.
    5. Gauge selection removal (eg. setting a gauge to None) will move the existing gauges up when the dash is saved or when navigating to the Customize Gauges page.
    6. Selecting Text or Circular Gauges for iOS will only select the Gauge when the Done button is tapped (fixes the disappearing gauges).
    7. The Circular Gauges 'Brake Pressure', 'Brake Primary Air', 'Brake Secondary Air' default ranges have changed. You must either Clear the dash or Reset the gauges to see the change.
    8. Added New Text Gauges:
      1. Fan State
      2. Fan Speed
      3. Total Hours
      4. Fuel Used
      5. Average Fuel Economy
      6. Instant Fuel Economy
      7. Trip Fuel Used
      8. Trip Fuel Economy
      9. Engine Load
      10. Engine Torque
      11. Driver Torque
      12. Intake Temp
      13. Coolant Level
      14. Selected Gear
      15. 11-20 Text Fields
    9. Added New Circular Gauges:
      1. Fan Speed
      2. Engine Load
      3. Engine Torque
      4. Driver Torque
      5. Intake Temp
      6. Coolant Level
  • Customize Gauges Page
    1. Renamed Gauge Arc to Sweep Angle.
    2. Added 'Start Angle' that allows rotating the gauge.
    3. Added 'Counter Clockwise' that allows changing the direction of the gauge range and needle.
    4. Added a 'Use the 2nd Needle Color' option for overlaying gauges.
    5. The 'Show the Needle in Red' option has been removed in lieu of the 'Custom Colors' settings.
  • View Dash Page
    1. Resized gauges will render a little more accurately.
    2. Tapping Engine Status with no faults (green) will navigate to the Drive page.
    3. Tapping Trip Fuel Used or Trip Fuel Economy will navigate to the Trip page (like Trip Distance).
    4. The Night Mode Gauge colors will default to the previously 'Show Darker Gauge' colors.
    5. The Text/Circular Gauges 'Brake Pressure', 'Brake Primary Air', 'Brake Secondary Air' show the data correctly.
    6. The 'Distance to Empty' Text Gauge shows correctly when Average Fuel Economy is not available from the ECM.
    7. When the page is first opened, data will be shown accurately for those gauges where the data is not changing (eg. Engine Status).
  • Trip Page
    1. Trip data is shown more accurately.
    2. The last trip is shown when opening the page.
    3. The Distance Remaining is calculated on the Trip Fuel Economy rather than the Life to Date Fuel Economy.
    4. Starting and ending a Trip with the 'Do Not Use GPS' option set will no longer display a 'No GPS' message.
    5. Added a 'Fuel Fill Up' button that will reset the Fuel Remaining to 100%. Note, this is only shown if 'Ignore Fuel Gauge' is set in Fuel Tank Settings and Fuel Used has been retrieved from the ECM.
  • Drive Page:
    1. Load Percent is changed to Engine Load.
    2. Driver Torque's unit of measure is changed to percent.
    3. Percent Torque is changed to Engine Torque and the unit of measure is changed to percent.
    4. Transmission gears show the data correctly.
    5. Brake Pressure, Brake Primary Air, and Brake Secondary Air show the data correctly.
    6. Aftertreatment data will not be shown for J1708 only adapters (6-pin).
    7. Average Fuel Economy and Distance Remaining show correctly when Average Fuel Economy is not available from the ECM.
    8. The 'Remind Me Again' message for the Fuel Level warning no longer loops.
  • Repair Page:
    1. Added Fan Speed.
    2. Added retrieving J1708 Exhaust Temp.
    3. Load Percent is changed to Engine Load.
  • Logging Page:
    1. Added Fan Speed.

    Edited by user Tuesday, February 12, 2019 2:08:59 PM(UTC)  | Reason: Not specified

  • Users browsing this topic
    Forum Jump  
    You cannot post new topics in this forum.
    You cannot reply to topics in this forum.
    You cannot delete your posts in this forum.
    You cannot edit your posts in this forum.
    You cannot create polls in this forum.
    You cannot vote in polls in this forum.